014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen Outlet F10X1

Outlet F10X1

With its particular 3 ways control valve it lifts or pull down the pump and the follower plate

filling of central distribution plants

These pumps are advised for the transfer of low viscosity oil (SAE 15/80)

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Dubbelwerkende pneumatische oliepompen Outlet F10X1It is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.