014-1063-030 - Follower plate for pumps with shank 30 mm subgroup-Complete sets medium or high viscosity

medium or high viscosity

hydraulic oil

It pushing the grease into the pump and avoids air cavities

but it can be easily calibrated by the user

014-1063-030 - Follower plate for pumps with shank 30 mm subgroup-Complete sets medium or high viscosityIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.